300w 4 Way Cavity RF Power Divider Splitter
Company profileShanghai Xiaowei Equipment Co., Ltd. located Shanghai, China which is branch for overseas market of Jiangsu Huacan Telecommunication Co., Ltd. We are specialist supplier of telecommunication equipment and the total solution for your project. Jiangsu Huacan Telecommunicaton Co. Ltd is a Private Science and Technology Enterprises and National Hi-tech Enterprise which mainly deals with developing, producing and selling wireless base station antenna and antenna accessories. Founded in 2007, the company has an area of 160 thousand square meters, and more than 2000 staffs.Our company has four production bases: feeder accessories and telecommunication cables; basestation antennas and passive components; coaxial connectors and arrestors; cable assembly and indoor Distributed Antenna. . Power Divider
Power splitters are passive devices for cellular band in Intelligent Building System (IBS), which are required to split/divide the input signal into multiple signals equally at separate output ports to enable balancing-out the power budget of the network.
Cavity Power Splitter/Divider
Type/Parameter |
Cavity Two Power Divider |
Cavity Three Power Divider |
Cavity Four Power Divider |
||
Specification | |||||
Frequency Range | 800-2700MHz | 800-2700MHz | 800-2700MHz | ||
Insertion Loss | ≤ 3.3dB | ≤ 5.1dB | ≤ 6.4dB | ||
Passband Ripple | ≤ 0.3dB | ≤ 0.45dB | ≤ 0.55dB | ||
VSWR (50Ω) | ≤ 1.3 | ≤ 1.3 | ≤ 1.3 | ||
Nominal Impedance | 50Ω | 50Ω | 50Ω | ||
Intermodulation(IM3) | ≤ -145dBc@2x43dBm/≤ -120dBc@2x43dBm | ≤ -145dBc@2x43dBm/≤ -120dBc@2x43dBm | ≤ -145dBc@2x43dBm/≤ -120dBc@2x43dBm | ||
Maximum Input Power | ≥300w | ≥300w | ≥300w | ||
Temperature Range | - 30oC ~ + 55oC | - 30oC ~ + 55oC | - 30oC ~ + 55oC | ||
Structure and artcraft | |||||
Connectors | N - F | N - F | DIN - F | ||
Color | Black | Black | Black | ||
Dimension (mm) | ≈ 193 x 25 x 25 | ≈ 200 x 25 x 25 | ≈ 200 x 25 x 25 | ||
Weight (Kg) | / | / | / | ||
Others | Surface should be clear, clean, with no deformation, no burrs and no damage. | ||||
Material requirements | |||||
Part name | Material | Surface treatment | |||
Body | AI 6061-T6/ADC12 | Inner surface should be clean, outer surface stoving varnished or powder coated | |||
Connect pole | Brass or AI 6061-T6 | Surface should be clear | |||
Insulator | PTFE | / | |||
Body of connector | Brass | Tri-Alloy plated | |||
Pin | Beryllium bronze/Phosphor bronze | Ag plated |
Detailed Images
For more information, please feel free to contact us!!